Parking Brake
Hand-Grip
Wrapped the sponge cover around the parking brake lever .
Indescribable is that insipid hard, thin, chilly lever .
So, the sponge cover wrapped around my own car was installed in Fit/JAZZ
.
In this, there is not worry to be able to do the bean on the hand
either .
(Although it thinks that there are not those who do a Side-turn all
over a town ...)
The Side-turn is necessary in the gymkhana race .
Considerably, cannot stop, if the feel when pulling a lever becomes
soften and the taste is known .
|
Buys it in the do-it-yourself store.
It's ditch having type that bought.
There was typing without the ditch either.
The inside diameter is for 20-22mm.
BTW, this is 110 Yen.
|
|
When inserting a sponge cover to a lever, only a
few applies the undiluted liquid of the neutral detergent for tableware
washing to sponge. Then, it is easy to insert. And, it rarely comes
off because it dries. Although the diameter of a lever is about
Ø30, insert strongly.
Power is very required although sponge is extended.
When the lever is pulled, the sponge rotates, shifts, and the lever
operation is considerably inconvenient if it is possible to insert
it easily.( For those who do a side turn, it is dangerous.) |
|
Hand feelings is pleasant.
Will become infatuation once it knows.
If it is a man, it must be thick. (^-^) |
The power degree of lever operation may be unclear until becoming
accustomed .
Because the sponge rolled in the Roll Bar should separately remove
the sponge when it is too large and removes the Console Box, it is
just good like this .
|